Structural Shapes, Rod & Sheet

Equal Leg Angle Channel
Solid Round Rod Round Tube
I-Beam Wide Flange Beam
Flat Sheet Square Tube
Solid Rectangular Bar Rectangular Tube
Solid Square Bar Rectangular Box Beam
Ladder Channel Z-Bar
Sludge Flight Channel Wireway Components
"E" Channel Toe Plate
Square Tube with Round Hole Slide Glide
U-Trough Concrete Embedment Angle
Superstud Fasteners Supernuts Fasteners
£ = Not stocked in all three resin series n = Stocked in special color
u= Also stocked in special color l  = Check for availability before ordering or designing with these shapes
All Stocked items carried in three standard resin series unless otherwise noted: 
  • Series 1500 - Isophthalic Polyester - Olive Green
  • Series 1525 - Iso Polyester FR - Light Gray
  • Series 1625- Vinylester FR - Beige 

 

Equal Leg Angle Channel
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked Stocked
1x1/8 3000 0.17 3x7/8x1/4 1700 0.77
1-1/2x1/4 2000 0.50 4x1-1/8x1-4 1200 1.11
2x1/4 1800 0.73 6x1-5/8x1/4 1200 2.68
3x1/4 1500 1.13 8x2-3/16x3/8 800 3.41
3x3/8 1200 1.66 10x2-3/4x1/2£ 600 5.50
4x1/4 1300 1.54 Nonstocked
4x3/8 900 2.31 1/2x1x1/8 5000 0.23
6x1/2 700 4.64 1-1/2x1x3/16 2200 0.46
Nonstocked 2x9/16x1/8 2800 0.25
1x3/16 2500 0.24 2-5/16x1x5/32 2000 0.45
1x1/4 2500 0.32 2-1/2x3/4x3/32 2500 0.25
1-1/2x1/8 2700 0.28 2-5/8x1x5/32 2000 0.48
1-/2x3/16 2200 0.41 3x1x3/16 1800 0.68
2x1/8 2500 0.37 3x1x1/4 1500 0.73
2x3/16 2000 0.56 3x1-1/8x1/4 1500 0.85
2x3/8 1500 1.03 3x1-1/4x1/4 1500 0.90
3x1/8 2000 0.52 3x1-1/2x1/4 1200 0.91
3x3/16 1500 0.78 4x1-1/16x1/8 1900 0.58
4x1/2 1300 2.86 4x1-3/4x3/16 1200 1.16
5x1/2 700 3.56 6x1-11/16x3/8 1000 2.46
6x1/4 900 2.35 7x1-3/4x3/16 1200 1.36
6x3/8 800 3.44 7x2x1/4 1200 2.00
8x2-3/16x1/4 1000 2.32
10x2-1/4x3/32 1200 1.06
10x2-3/4x1/8 1500 1.42

 

Solid Round Rod Round Tube
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked Stocked
1/8    £ 20000 0.01 1-1/2x1/8 1900 0.45
3/16  £ 15000 0.02 2x1/4 1400 1.12
1/4    £ 10000 0.043 Nonstocked
5/16  £ 6000 0.06 3/4x1/8 2000 0.18
3/8    £ 5000 0.097 1x1/8 2000 0.25
12     £ 3500 0.173 1-1/4x3/32 1900 0.27
5/8    £ 2400 0.268 1-1/4x1/8 1900 0.32
3/4    £ 2000 0.387 1-1/4x3/16 1800 0.46
1       £ 500 0.688 1-1/2x1/4 1500 0.79
1-1/4 £ 1200 1.10 1-3/4x1/8 1600 0.47
1-1/2 £ 900 1.52 1-3/4x1/4 1500 0.94
2       £ 600 2.56 2x1/8 1500 0.60
3       £ 400 5.65 2x3/16 1500 0.81
Nonstocked 2-1/2x1/8 1500 0.71
3/32 20000 0.006 2-1/2x1/4 1000 1.43
13/16 1800 0.454 3x1/4 900 1.70
7/8 1700 0.527 3-1/2x1/4 900 2.04
2/1/2 500 3.92

 

I-Beam Wide Flange Beam
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked Stocked
1x2x1/4 1300 1.48 3x1/4 1000 1.69
8x4x3/8 600 4.61 4x1/4 800 2.22
Nonstocked 6x1/4 700 3.52
3x1-1/2x1/4 1400 1.11 6x3/8 600 5.13
6x3x1/4 800 2.31 8x3/8 400 6.97
6x3x3/8 800 3.39 Nonstocked
8x4x1/2 700 6.03 8x1/2 400 9.23
10x5x3/8 700 5.78 10x3/8 400 8.78
10x5x1/2 600 7.58 10x1/2 400 11.64
12x6x1/2 400 9.24 12x1/2 300 13.68

 

Flat Sheet Solid Rectangular Bar
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked

Nonstocked
1/8x48x96 188shts 1.41 1/8x1 3500 0.10
1/4x48x96 94shts 2.34 9/64x1-1/2 3000 0.18
3/8x48x96 63shts 3.54 3/16x1-1/4 2300 0.18
1/2x48x96 47shts 4.68 1/4x1-1/4 2200 0.25

Nonstocked

 5/16x2 2000 0.53
3/16x48x96 140shts 1.71 3/8x1-1/4 1800 0.40
5/8x48x96 l 40shts 5.79 3/8x1-7/8 1800 0.60
3/4x48x96 l 30shts 6.94 1/2x1 1700 0.40
1x48x96    l 20shts 9.27 1/2x1-3/16 1500 0.51
3/4x1-1/4 1200 0.75

 

Square Tube Rectangular Tube
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked Stocked
1x1/8 1800 0.32 3/4x1-1/4x1/8 n 1700 0.35
1-1/2x1/8 1800 0.50 Nonstocked
1-3/4x1/4u£ 1600 1.19 3/4x5x1/8 1000 1.01
2x1/8      u 1600 0.74 1x8x3/32 1000 1.20
2x1/4      u 1200 1.40 1x8x1/4 900 3.45
3x1/4 800 2.20 1-1/4x2-1/2x1/8 5000 0.66

Nonstocked

 1-17/64x7-19/64x3/16 1500 2.33
1-1/2x1/4 2500 0.98 1-7/16x4-7/16x1/8 2500 1.13
1-3/4x1/8 2500 0.64 1-5/8x2-1/2x1/8 2500 0.75
2x3/16 1000 0.95 1-3/4x4-3/4x1/8 2500 1.23
2x3/8 1000 1.95 1-3/4x7-3/4x3/16 1200 2.72
4x1/4 700 2.48 2x5x1/8 2500 1.42

 

Solid Square Bar Rectangular Box Beam
Size in Inch Min Mill Run Lbs. per Lin. Ft. Size in Inch Min Mill Run Lbs. per Lin. Ft.
Stocked Nonstocked

1-1/4x1-1/4 n

 1000 1.31 6x4x1/4 1000 3.56
1-1/2x1-1/2 n 800 1.83 7x4x3/8 800 6.05

Nonstocked

 8x4x3/8 800 6.20
1x1 1400 0.87 24x4-1/2x3/16 1000 11.77

 

Ladder Channel

Z-Bar
Size in Inch Min Mill run Lbs. per Lin. Ft. Size in Inch Min Mill run Lbs. per Lin. Ft.
Nonstocked Nonstocked
1.875x130x1.13x0.188 2200 0.43 2x1-1/2x3/32 2500 0.21
2.750x125x1x0.125 2200 0.40 2-1/4x3/32x1-1/2x1/8 2500 0.24
3.196x0.130x1.17x0.188 1500 0.70 2-3/4x1-1/2x3/32 2500 0.27
3.296x0.130x1.17x0.188 1500 0.57 3x1-1/2x3/32 2500 0.29
4.0x0.125x1.750x0.187 1500 0.79 4x1-1/2x3/32 2500 0.35
      6x1-1/2x5/32 2500 0.87

 

Sludge Flight Channel Wireway Components

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.
Nonstocked Nonstocked
6x1/8x2-1/2x3/16 1000 1.21 4" Trough 1000 1.88
8x1/8x2-1/2x3/16 1000 1.39 Cover 1000 0.87
Bracket 1000 3.37
Bracket Cover 1000 1.42

 

"E" Channel Toe Plate

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.
Nonstocked Stocked

6x1-5/8x1/4

 1000 1.95 4x1/2x1/8 n 2500 0.53

 

U-Trough Slide Glide

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.
Nonstocked Stocked
12x12x1/4 1000 6.54 2 1/2x2 1/4x1/4 n 2500 1.13

 

Square Tube with Round Hole Concrete Embedment Angle

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.

Size in Inch

Min Mill Run

Lbs. per Lin. Ft.
Nonstocked Stocked

1x5/8 dia

 4000 0.60 1x1-1/2x1/4      n 1400 1.00
1x3/4 dia 5000 0.49 1-1/2x1-1/2x1/4n 1300 1.10
      2x1-1/2x1/4      n 1200 1.20
     

Nonstocked
      3/4x1-1/2x1/4 1500 0.90

 

Superstud Fasteners Supernuts Fasteners

Item

Weight per Foot

Item

Weight per Package
Stocked Stocked
3/8"-16UNC £ 0.076 3/8"-16UNC £ 0.64
1/2"-13UNC £ 0.129 1/2"-13UNC £ 1.26
5/8"-11UNC £ 0.209 5/8"-11UNC £ 1.12
3/4"-10UNC £ 0.315 3/4"-10UNC £ 1.42
1"-8UNC      £ 0.592 1"-8UNC      £ 1.65

*All superstud/nuts is gray in color. Stock in 48" and 96" lengths.

 

 

8201 Zeigler Blvd. Mobile, Alabama 36608. USA  Tel: (251) 633-2130 

Fax: (251) 633-2178 Email: Chrisbailey111@MSN.Com

copyright © 2002 All Plastics And Fiberglass, Inc.

This Page was last updated on : 08/01/02 16:17